Cap-A-Dapt Kit for Chevy V8
Spark plug style terminals are used on the cap for tight connections that will not vibrate loose.
Free Shipping on orders over $100*
The MSD Cap-A-Dapt adapts a large, Ford style cap onto your MSD distributor. This large cap spaces the spark plug terminals farther apart which lessens the chances of cross-fire and ionization occurring.
The rotor is injection molded out of Rynite® for incredible strength and resistance to spark. Thick vanes are incorporated to stir up the air in the cap for even more ionization prevention. Three Cap-A-Dapts are available; two with a fixed rotor and another with an adjustable, two-piece rotor.
The two-piece rotor allows you to adjust the rotor tip to cap terminal alignment so you can adjust the rotor phasing. All of the MSD Distributors are phased at the factory, but if you are running a Multi-Step Retard or Timing Controller, having the ability to adjust the rotor phasing is beneficial.
The Cap-A-Dapts will install on most MSD Pro-Billet Distributors (except the Ford FE, PN 8594). Both kits are supplied with a high quality cap with brass terminals, rotor and cap spacer.
|Warning||California Proposition 65|
This part is legal for use on Emissions Controlled Vehicles when used in accordance with the manufacturers application guide because it has a California Air Resources Board Executive Order number or is a direct or consolidated replacement part.
The following vehicles are considered Emissions Controlled Vehicles:
- 1966 and newer U.S. manufactured California Certified vehicles
- 1968 and newer U.S. manufactured Federally Certified vehicles
- 1968 and newer Foreign manufactured vehicle
WARNING FOR 8420: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
*Free Shipping & Handling only offered to the continental US on orders over $100.
Some parts are not legal for use in California or other states with similar regulations.