High Vibration Blaster Coil

The sturdy metal housing of the High Vibration Coil is completely pot­ted with a premium grade epoxy to completely encase the coil’s primary and secondary windings.

PART# 8222

Suggested Retail: $61.14
Your Price:$55.03
Free Shipping on orders over $100*
CARB EO: D-40-37


In applications such as off-road, marine or other harsh conditions, the MSD Blaster High Vibration Coil is the best choice. This protects the coil’s internal components from high and low frequency vibrations that are commonly experienced in racing. If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD Blaster Ignition, MSD 5, 6 or 7, the Blaster Coil line is the right choice. Our Blaster Coils are designed for improved spark output! Special 100:1 windings are used to provide maximum build-up of voltage! These windings are held secure and kept cool in an oil filled metal canister. The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. Each Blaster Coil can be used with a stock ignition, Blaster Ignition, MSD 5, 6 or 7 Ignition Control. Most late model vehicles with electronic ignitions do not require a ballast resistor, check your ignition and manufacturers specifications to determine if a ballast is required in your application. Mallory Unilite applications also require the ballast resistor.


  • Metal canister is encased with epoxy to protect the windings from high vibration applications
  • Improved output coil for electronic ignitions, and MSD Ignitions (ballast resistor required for points)
  • 100:1 turns ratio and lower primary resistance produce high voltage output
  • CARB E.O. Approved


Emission Code1
Inductance8 mH
Maximum voltage45,000 Volts
Peak current140 mA
Primary resistance.7 OHMs
Secondary resistance4.5K OHMs
Spark duration350 uS
Turns ratio100:1
WarningCalifornia Proposition 65

Tech Resources

Parts & Kits


This part is legal for use on Emissions Controlled Vehicles when used in accordance with the manufacturers application guide because it has a California Air Resources Board Executive Order number or is a direct or consolidated replacement part.

The following vehicles are considered Emissions Controlled Vehicles:

  • 1966 and newer U.S. manufactured California Certified vehicles
  • 1968 and newer U.S. manufactured Federally Certified vehicles
  • 1968 and newer Foreign manufactured vehicle
WARNING FOR 8222: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
*Free Shipping & Handling only offered to the continental US on orders over $100.