MSD Releases New Pro-Billet Distributors, Street Fire Distributors, Black Solid State Relay Block, and Ignition Tester
SOLID STATE RELAY BLOCK
MSD's Solid State Relay Block, now available in black, eliminates wiring headaches and cleans up any engine compartment, taking the place of four standard relays. Four independent channels can be activated using either power or ground, and each is capable of handling up to 20 amps of continuous current, providing up to 80 amps of power. This compact, efficient module is perfect for controlling electric fans, water pumps, nitrous solenoids, auxiliary lighting, or any electrical accessory that would normally require a relay. LED status indicators ensure proper wiring and operation of each channel, and if a problem should arise the relay block has built-in automatic over-temp, short-circuit, and overload protection. It even comes complete with all the necessary hardware for a fast, easy installation and can be rotated 90 degrees to accommodate numerous mounting locations.
MSD’s most popular performance distributor is now available with a black cap for a stealth look that's right at home in any high-end engine compartment. Now available for Chevy and Chrysler applications, Pro-Billet distributors feature stainless steel terminals, a maintenance-free high-output magnetic pick-up, and a .500-inch steel shaft supported by a sealed ball bearing for maximum high-rpm stability. It's designed specifically for MSD 6, 7 or 8 Series ignitions and comes with multiple springs and stop bushings to make it easier to tune an advance curve perfect for your exact application.
FORD PRO-BILLET DISTRIBUTOR
Ford Pro-Billet Distributors have a special compact housing and black cap that are 5/8-inch smaller than stock Ford distributors, providing extra room at the front of the engine. They feature stainless steel terminals, a maintenance-free high-output magnetic pick-up, and a .500-inch steel shaft supported by a sealed ball bearing for maximum high-rpm stability. It's compatible with MSD 6, 7 or 8 Series ignitions and comes with multiple springs and stop bushings to make it easier to tune an advance curve perfect for your exact application.
PRO-BILLET READY-TO-RUN DISTRIBUTORS
Chevy V8 Pro-Billet Ready-to-Run Distributors are a substantial upgrade from obsolete points distributors or bulky HEIs. Installation doesn't get any easier – just install the distributor, connect three wires and the coil, and fire up the engine. The increased output of the amplifier easily outperforms stock ignitions and smooths out any engine's idle, improving start-up and providing a much higher rpm range. A maintenance-free magnetic pick-up accurately triggers the module, and the adjustable mechanical advance allows you to custom-tailor an ignition curve to perfectly match your engine’s specific requirements. It even comes with a separate tach circuit that's ideal for triggering an aftermarket EFI such as Holley, Sniper, Atomic EF, or others.
STREET FIRE DISTRIBUTORS
MSD Street Fire Distributors provide maximum performance for the value-conscious enthusiast. Available for both GM Vortec V8 and HEI applications, they're direct drop-in units with black caps and brass terminals for a stealthy look that's right at home in any engine compartment. The HEI version's advance assembly features coated weights and welded weight pins (not simply pressed-in), and the distributor gear is the same one used on MSD's top-of-the-line Pro-Billet distributor line.
MSD’s ignition tester now has the ability to test not only traditional single-coil ignition systems but also coil-per-cylinder applications. It even gives you the ability to create an RPM run as the tester goes through the RPM range, letting you confirm that the ignition activates accessories such as shifters, nitrous solenoids, and more. It features a backlit, easy-to-read display, settings for 10 different types of crankshaft, and a single knob to control all functions.
MSD Releases Large Assortment of New Ignition Products| 03/01/2018
Black Ultimate HEI ignition kits, Chevy V8 caps and rotors, LS boot/terminal kits, HEI distributor timing lockouts, and Atomic AirForce intake O-ring kits are now available.
Hedgecock Wins Back-to-Back at Volunteer Speedway| 05/17/2018
A 6CT Circle Track Ignition, Blaster coil, and black Pro-Billet distributor power him to victory
MSD Releases Black Chevy V8 Crank Trigger Distributor & Air/Fuel Wideband 02 Gauge Kits| 06/11/2018
The distributor is perfect for applications where space is tight, and the gauges are available in both black and white.
Meet MSD's Joe Soto| 05/31/2018
Head of MSD's tech support team drives a '65 Mustang that's been in the family since it rolled off the showroom floor.