MSD Releases Large Assortment of New Ignition Products
BLACK ULTIMATE HEI IGNITION KITS
MSD Black Ultimate HEI Ignition Kits contain everything you need to upgrade your early-model GM HEI distributor to a high-performance piece. The included HEAT Digital 8.5-amp performance module is perfectly matched with the coil specifications, providing the highest voltage and energy for maximum spark output. The kit comes complete with the module, coil, rotor, dust cover, and a black distributor cap.
CHEVY V8 CAPS AND ROTORS
MSD Caps and Rotors are a fast, easy way to keep Pro Billet distributors, MSD's most popular performance distributors, tuned up and in top condition. Now available for small-diameter V8 Chevy distributors, they're molded from a special material for superior strength and reliability. Excellent dielectric properties prevent crossfire and arcing, and low-resistance terminals and a low-resistance rotor tang ensure maximum spark transfer to the plugs.
LS BOOT/TERMINAL KITS
MSD Boot/Terminal Kits allow you to make custom spark plug wire sets for LS and current-gen LT engines. They work with either GM or aftermarket coils, come in a complete set of eight boots with eight terminals and are perfect for racing or high-performance street use. They're compatible with MSD 8.5mm Super Conductor spark plug wires and are offered for LS1s with 45-degree boots and LT1s with your choice of straight or 90-degree boots.
HEI DISTRIBUTOR TIMING LOCKOUTS
MSD HEI Distributor Timing Lockouts make locking out mechanical and vacuum timing advance in HEI distributors simple for circle-track racers – no more welding a tack on the mechanical-advance weights or struggling to keep the vacuum advance from moving once the canister is removed. The mechanical-advance lockout plate replaces the old weights and slides over the pins on the shaft and the advance assembly. The vacuum-advance block-off bolts in place of the old vacuum advance canister to completely lock out timing. Both are standard equipment on MSD Circle Track HEI distributors but are fully compatible with most GM HEIs.
ATOMIC AIRFORCE INTAKE O-RING KITS
MSD Atomic AirForce Intake O-Ring Kits are a handy, inexpensive way to make reinstalling Atomic AirForce intake manifolds a much easier job. Compatible with both LS 1/2/6 and LS7 AirForce intakes, this set of tear-resistant Viton O-rings ensures a leak-free seal to the cylinder heads.
MSD Releases New Pro-Billet Distributors, Street Fire Distributors, Black Solid State Relay Block, and Ignition Tester| 12/06/2017
Pro-Billet Distributors available for Chevy, Ford, and Chrysler 318/360 and 426/440
MSD Releases 6EFI Universal Ignition Control Boxes| 02/14/2018
They're compatible with 4-, 6- and 8-cylinder engines with magnetic-pickup, electronic, and even points distributors.
Hedgecock Wins Back-to-Back at Volunteer Speedway| 05/17/2018
A 6CT Circle Track Ignition, Blaster coil, and black Pro-Billet distributor power him to victory
MSD Employment Opportunities: Embedded Software Designer| 04/18/2018
MSD LLC. Has an immediate opening for an Embedded Software Designer.